Rosslare AC-G43 Specifikace stáhnout pdf (Strana 27)

Programming

AC-F/G4x Family Installation and Programming Manual 27

5.1.1 Entering the Programming Mode

• The controller must be in Normal mode to enter the programming

mode.

• The factory default 4-digit programming code is 1234.

• If a Programming code is not entered within 5 seconds, the

controller returns to Normal mode.

To enter Programming mode:

1. Press # twice within 0.5 seconds.

Mode indicator turns off and the Door

indicator turns red

2. Enter your programming code.

If the programming code is valid, the door

Indicator turns green and the controller

enters the Programming mode.

5.1.2 Exiting the Programming Mode

• Wrong entries may reset the controller back to Normal mode.

• If no key is pressed for 1 minute, while in programming mode, the

controller exits Programming mode and returns to Normal mode.

To exit Programming mode:

1. Press # twice within 0.5 seconds.

 You hear three beeps.

 The door indicator turns off.

 The mode indicator turns green.

The above indicates that the controller has returned to Normal mode.

While enrolling, deleting users, or while in code assignment

mode, press # twice to exit Programming mode.

Mode

Door

Red

Mode

Door

Green

Mode

Door

Green

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Žádné komentáře

Rosslare AC-G43 Specifikace Strana 27